\nsolution we propose. Born from ‘experience in energy saving and knowledge of<\/em>
\npressostatic structures gained over the years.<\/em>.<\/p>\n
![\"\"](\"https:\/\/www.greenetiks.it\/wp-content\/uploads\/2021\/07\/Coperture-pressostatiche-1024x549.jpg\")
\nENERGY SAVINGS<\/span><\/h2>\nAchieving energy efficiency is one of the most important goals for entrepreneurs: reducing
\nconsumption means not only containing costs but also improving in organization and in service
\noffered.<\/p>\n
Energy efficiency programs can be of various types, but they all start with the
\ndiagnosis of energy consumption, which is necessary to establish the different actions that can be implemented.
\nIt is these actions that will lead toward the upgrading of sports facilities,
\nchoosing to replace, for example, old heating systems with new motors with high
\nefficiency, thus obtaining better performing and less polluting energy classes.<\/p>\n
\nCRITICITY AND SOLUTIONS<\/span><\/h2>\nThe main characteristic of pressure structures is the fact that they are supported by the pressure
\natmospheric interior. For this reason they are also called pressostatic balloons.
\nThe pressure difference between inside and outside is very few PA: in fact, 150 PA are sufficient
\nto support any structure. This difference is maintained by one or more
\ninflation, integrated with the heating system.<\/p>\n
When the balloon is pressurized, the system does not have to operate at maximum power, but
\nonly maintain internal pressure. On the contrary at the presence of special weather conditions,
\nsuch as wind and snow, the engine will have to work at full power to increase the internal pressure and
\nkeep the structure safe.<\/p>\n
So far, to cope with the weather conditions and leakage present, modules have been provided that are
\nheavily oversized and unable to adapt to various conditions of use, since the motors
\nused do not have the ability to modulate their rotational speed and power input,
\nresulting in substantial and constant power consumption throughout the 24 hours.
\nConstant use of motors at full power results in higher electricity costs,
\ngreater noise pollution and higher maintenance costs, wearing out faster
\nmechanical parts.<\/p>\n
To limit\/eliminate all these inconveniences, the PRESS system uses an Inverter that can modulate
\nthe speed and power of the motors, thanks to an electronically managed smart system.
\nThanks to sensors inside and outside the PRESS, the Inverter regulates the work of the systems,
\neven reaching savings of 70 percent (savings depend on the type of motor and how many years
\nis in operation).<\/p>\n
According to feedback provided by sports clubs, which have already adopted the PRESS system,<\/em>
\nthe investment pays for itself after one or two seasons of operation, thanks to lower<\/em>
\nenergy costs.<\/em><\/p>\n\nThe PRESS SYSTEM<\/span><\/h2>\nThe PRESS system is an excellent tool for sports clubs and others to decrease consumption and
\noffer better service.
\nIn addition to switching to electronic motor control using the Inverter, the advice is to
\nuse high-efficiency motors, considering whether to replace the old motor with a new
\ngeneration.<\/p>\n
Other necessary actions are:
\n– Optimize the mechanical transmission;
\n– Change the transmission ratios to obtain maximum efficiency from the fan;
\n– Insulate the structure, to avoid unnecessary air leakage.
\nAn industrial controller controls the Inverter according to indoor and outdoor conditions,
\nlowering and increasing the motor speed and consequently consumption.<\/p>\n
\nPRESS 4.0<\/span><\/h2>\nPress 4.0 was created as an upgrade for the PRESS system, allowing the PRESS system to be connected
\nto our cloud.
\nIt provides real-time monitoring with cell phone alarms, ex: snow, power failure,
\nengine blockage.
\nIt allows you to set the speed remotely, having an always up-to-date system that keeps
\nhistorical statistics and can be integrated with the Gestennis service.<\/p>\n
\nconsumption means not only containing costs but also improving in organization and in service
\noffered.<\/p>\n
\ndiagnosis of energy consumption, which is necessary to establish the different actions that can be implemented.
\nIt is these actions that will lead toward the upgrading of sports facilities,
\nchoosing to replace, for example, old heating systems with new motors with high
\nefficiency, thus obtaining better performing and less polluting energy classes.<\/p>\n
The main characteristic of pressure structures is the fact that they are supported by the pressure
\natmospheric interior. For this reason they are also called pressostatic balloons.
\nThe pressure difference between inside and outside is very few PA: in fact, 150 PA are sufficient
\nto support any structure. This difference is maintained by one or more
\ninflation, integrated with the heating system.<\/p>\n
When the balloon is pressurized, the system does not have to operate at maximum power, but
\nonly maintain internal pressure. On the contrary at the presence of special weather conditions,
\nsuch as wind and snow, the engine will have to work at full power to increase the internal pressure and
\nkeep the structure safe.<\/p>\n
So far, to cope with the weather conditions and leakage present, modules have been provided that are
\nheavily oversized and unable to adapt to various conditions of use, since the motors
\nused do not have the ability to modulate their rotational speed and power input,
\nresulting in substantial and constant power consumption throughout the 24 hours.
\nConstant use of motors at full power results in higher electricity costs,
\ngreater noise pollution and higher maintenance costs, wearing out faster
\nmechanical parts.<\/p>\n
To limit\/eliminate all these inconveniences, the PRESS system uses an Inverter that can modulate
\nthe speed and power of the motors, thanks to an electronically managed smart system.
\nThanks to sensors inside and outside the PRESS, the Inverter regulates the work of the systems,
\neven reaching savings of 70 percent (savings depend on the type of motor and how many years
\nis in operation).<\/p>\n
According to feedback provided by sports clubs, which have already adopted the PRESS system,<\/em> The PRESS system is an excellent tool for sports clubs and others to decrease consumption and Other necessary actions are: Press 4.0 was created as an upgrade for the PRESS system, allowing the PRESS system to be connected
\nthe investment pays for itself after one or two seasons of operation, thanks to lower<\/em>
\nenergy costs.<\/em><\/p>\n\nThe PRESS SYSTEM<\/span><\/h2>\n
\noffer better service.
\nIn addition to switching to electronic motor control using the Inverter, the advice is to
\nuse high-efficiency motors, considering whether to replace the old motor with a new
\ngeneration.<\/p>\n
\n– Optimize the mechanical transmission;
\n– Change the transmission ratios to obtain maximum efficiency from the fan;
\n– Insulate the structure, to avoid unnecessary air leakage.
\nAn industrial controller controls the Inverter according to indoor and outdoor conditions,
\nlowering and increasing the motor speed and consequently consumption.<\/p>\n\nPRESS 4.0<\/span><\/h2>\n
\nto our cloud.
\nIt provides real-time monitoring with cell phone alarms, ex: snow, power failure,
\nengine blockage.
\nIt allows you to set the speed remotely, having an always up-to-date system that keeps
\nhistorical statistics and can be integrated with the Gestennis service.<\/p>\n